2012 Mercedes-benz Vito

Central Front Prop shaft flexible coupling slightly deteriorated (6.1.7 (d) (i))

Offside Rear Exhaust mounting defective (6.1.2 (a))

All direction indicators incorrect colour (4.4.3 (a))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Fuel tank leaking On top of tank area (6.1.3 (b) (i))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Central Front Prop shaft flexible coupling slightly deteriorated (6.1.7 (d) (i))

Offside Rear Exhaust mounting defective (6.1.2 (a))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Front and rear bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Front and rear bush (5.3.4 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Position lamp not working (4.2.1 (a) (ii))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Front and rear bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Front and rear bush (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Front and rear bush (5.3.4 (a) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Front and rear bush (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Shock absorbers has an excessively worn bush (5.3.2 (c))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Shock absorbers has an excessively worn bush (5.3.2 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Front and rear bush (5.3.4 (a) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Front and rear bush (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge on limit (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Brake lever has insufficient reserve travel (1.1.2 (a))

Engine MIL inoperative or indicates a malfunction light on (8.2.2.2 (g))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Reversing lamp inoperative (4.6.1 (a))

Nearside Brake pipe corroded, covered in grease or other material front to rear corroded (1.1.11 (c))

Offside Brake pipe corroded, covered in grease or other material front to rear corroded (1.1.11 (c))

Rear Service brake fluctuating, but not excessively both discs (1.2.1 (e))

Exhaust emissions exceed manufacturer's specified limit Limit 0.1 (8.2.2.2 (a))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Shock absorber has a slightly worn bush both rear upper (2.7.4)

Suspension arm rubber bush deteriorated but not resulting in excessive movement both front lower (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Registration plate lamp not working (1.1.C.1d)

Both front tyres getting abit worn at inner tread edges

N/S/R tyre abit low on tread

N/S/R wheel inner rim abit bent

Offside Rear Tyre worn close to the legal limit (4.1.E.1)