2001 Alfa Romeo 166

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Rear Brake cable insecure (1.1.15 (c))

Offside Front Headlamp aim too low (4.1.2 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Electrical wiring likely to touch hot or rotating parts wiring by drive shaft (4.11 (a) (iii)) DANGEROUS

Nearside Front Electrical wiring insecure (4.11 (a) (i))

Nearside Rear Exhaust has a minor leak of exhaust gases missing bolt (6.1.2 (a))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Headlamp not working on dipped beam hid (4.1.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

all4 discs corroded

Both rear tyres worn low on inner edges

Corrosion to rear exhaust

Front brake pads wearing low

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

Slight corrosion to rear brake pipes

Wear to front brake pads

Front Brake hose excessively deteriorated both sides (3.6.B.4d)

engine mounting deteriorated resulting in excessive movement top mount (6.1.D.1a)

Offside Front Track rod end ball joint has slight play inner joint (2.2.B.1f)

Offside Rear tyre worn on inner edge

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear exhaust box corroded

Brake fluid warning lamp illuminated (3.6.G.2)

Hydraulic brake cylinder leaking hydraulic fluid clutch slave cylinder (3.6.A.1)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement saddle bush (2.4.G.2)

Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement saddle bush (2.4.G.2)

Rear Exhaust system not adequately supported rubber hanger broken (7.1.1)

Offside Front Track rod end ball joint has slight play inner joint (2.2.B.1f)

Offside Rear tyre worn on inner edge

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear exhaust box corroded

engine light on

Front Brake hose slightly chafed (3.6.B.4d)

engine steady bracket rubber deteriorated

Nearside Inner Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

One rear silencer moutning broken

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Inner Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Headlamp aim too far to the right (1.8)

One rear silencer moutning broken

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

rear exhaust mounting broken

Nearside Headlamp cleaning device inoperative (1.7.2)

Offside Headlamp cleaning device inoperative (1.7.2)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

rear exhaust mounting broken

rear exhaust rubber mounting deteriorating

Horn not working (1.6.2a)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low and too far to the right. (1.8)

Offside Registration plate lamp not working (1.1.C.1d)

rear exhaust rubber mounting deteriorating

front registration plate damaged

Offside Headlamp aim too high (1.8)

Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

front registration plate damaged

one offside rear sidelamp bulb not working

Nearside handbrake performance low

front brake juddering slightly (3.7.A.2b)

Nearside Front position lamp(s) not working (1.1.A.3b)

front brake juddering slightly (3.7.A.2b)