2006 Daihatsu Extol

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))

Rear Brake pipe excessively corroded (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Underbody corroded

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Underbody corroded

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Suspension component mounting prescribed area is corroded but not considered excessive crossmember (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front crossmember corroded

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Track rod end ball joint has slight play (2.1.3 (b) (i))

Rear axle casing and brackets corroded

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Suspension component mounting prescribed area is corroded but not considered excessive crossmember (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Inner wheel arches rusty

Front outriggers rusty

Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)

Rear valance rusty and holed

rust on underside

Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)

Rear Suspension component mounting prescribed area is corroded but not considered excessive inner valance (2.4.A.3)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch (2.4.A.3)

Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing (2.4.A.3)

Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)

Rear inner valance rusted/holed

Exhaust has a minor leak of exhaust gases (7.1.2)

Rear inner valance holed

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Exhaust has a minor leak of exhaust gases (7.1.2)

Rear inner valance holed

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front front brake binding (3.7.B.1)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front front brake binding (3.7.B.1)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)