2007 Yamaha XT

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Rear suspension lightly rubbing not affecting the movement of the rear suspension (2.4.A.3a)

Direction indicators affected by the operation of another lamp (1.5.1c)

Headlamp aim too high (1.6)

Headlamp switch faulty (1.2.4)

Horn not loud enough to be heard by another road user (1.7.3a)

Nearside Front Direction indicators not working (1.5.1c)

Offside Steering lock stop ineffective (2.1.3)

Rear Brake pedal insecure (3.1.2a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Wheel spoke cracked. (4.2.1b)

Riders seat insecure (6.2.1a)

Steering movement excessively stiff with the wheel raised (2.2.1b)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Rear suspension lightly rubbing not affecting the movement of the rear suspension (2.4.A.3a)

front brake lever has a sharp edge

Clutch lever shortened so it cannot be readily operated. (6.2.1g)

Exhaust is leaking and excessively noisey (7.1.1b)

Headlamp aim beam image kick up to the offside (1.6)

Indicator tell tale not functioning (1.5.2)

Rear Brake cylinder insecurely mounted (3.2.B1a)

Rear Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c)

Rear Brake pedal is positioned so that the brake cannot be readily applied (3.1.3c)

Wheel alignment incorrect which adversely affects the handling bent handle bars (2.5.1)

Fairings insecure but not likely to impede the steering (2.1.2e)

Rear wheel bearings have slight free play (2.4.A.2c)

Brake lever is short but brake can still be readily applied (3.1.3c)

Centre Rear Rear reflector on motorcycle missing (1.4.1)

Front Tyre worn close to the legal limit (4.1.3(ii))

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front shock absorber seal failed and leaking oil (2.3.3)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Drive chain sprocket slightly worn (6.2.1e)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear wheel bearings have excessive free play (2.4.A.2c)

Drive chain slightly loose (6.2.1d)

Front Drive chain sprocket slightly worn (6.2.1e)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear Drive chain sprocket slightly worn (6.2.1e)

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))