2010 Suzuki Alto

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Brake pipe corroded, covered in grease or other material inner arch (1.1.11 (c))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear mount (5.3.4 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material pipe to rear flexi (1.1.11 (c))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake pipe corroded, covered in grease or other material inner arch (1.1.11 (c))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake pipe corroded, covered in grease or other material pipe to rear flexi (1.1.11 (c))

Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement rear mount (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Shock absorbers has a reduced damping effect both shock absorbers (5.3.2 (d))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced nearside and offside at axle mount (6.1.1 (c) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Brake pipe corroded, covered in grease or other material inner arch (1.1.11 (c))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear mount (5.3.4 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material pipe to rear flexi (1.1.11 (c))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake pipe corroded, covered in grease or other material inner arch (1.1.11 (c))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake pipe corroded, covered in grease or other material pipe to rear flexi (1.1.11 (c))

Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement rear mount (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Shock absorbers has a reduced damping effect both shock absorbers (5.3.2 (d))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced nearside and offside at axle mount (6.1.1 (c) (i))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Brake performance unable to be tested Excessive bind on OSR (1.2.1 (g))

Emissions unable to be completed No Engine oil showing on dipstick (8.2.1.2 (d))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

nsf tyre worn outer edge

Nearside Front Tyre worn close to legal limit/worn on edge 2mm and slightly worn outer edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 2.5mm and slightly worn outer edge (5.2.3 (e))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Horn not working (7.7 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge 2mm and slightly worn outer edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 2.5mm and slightly worn outer edge (5.2.3 (e))

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

both front tyres wearing on edges

Nearside Front Steering locking device missing track rod end (2.2.C.1g)

Front Brake pad(s) wearing thin (3.5.1g)

n/s/f tyre down to 2m.m on both edges

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)