2012 Honda Cbf 125 M-b

Registration plate deteriorated but not likely to be misread (0.1 (b))

Headlamp aim too high (4.1.2 (a))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Fuel cap ineffective (6.1.3 (b) (i))

Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Headlamp aim too low (4.1.2 (a))

Motorcycle structure joining/attachment plate or fastening insecure trailing arm to brake drum securing pin missing (6.1.1 (b) (i))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Fork yoke in such a condition that steering control is adversely affected fork yokes out of alignment (2.2.2 (d) (ii)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

no mirrors fitted

uneven wear rear tyre

Offside Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected security plate nut loose (5.2.1 (c) (ii))

Front Brake binding but not excessively (1.2.1 (f))

Head bearing have slight tight spot

Rear Brake excessively binding (1.2.1 (f))

Steering operation impeded by a fairing (2.1.4 (e))

Front Brake lever so insecure that the brake cannot be readily applied (1.1.2 (e) (ii)) DANGEROUS

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Tyre valves worn

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Brake disc(s) slightly worn (3.2.A1l)

front brake fluid low