2012 Toyota Hilux

Vehicle heavily undersealed

Front Exhaust has a minor leak of exhaust gases Front flange (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened N/S and O/S (5.3.3 (b) (i))

Nearside Rear Brake hose has slight corrosion to ferrule Ferrules at both flexi pipes (1.1.12 (f) (i))

Nearside Rear Shock absorbers has slight external damage to the casing Casing corroded (5.3.2 (b))

Offside Rear Shock absorbers has slight external damage to the casing Corroded (5.3.2 (b))

Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis throughout (6.1.1 (c) (i))

Front Exhaust emissions likely to be affected by an exhaust leak Emissions not tested (8.2.2.1 (b))

Front Exhaust has a major leak of exhaust gases Down pipe snapped at rear flange (6.1.2 (a))

Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sills - N/S and O/S (6.1.1 (c) (i))

Nearside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Front Power steering pipe/hose leaking Corroded through and leaking (2.1.5 (a))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill holed and corroded (7.1.1 (a) (i))

Nearside Front Upper Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner chassis rail at fuel tank (6.1.1 (c) (i))

Nearside Rear Leaf spring fractured (5.3.1 (b) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill holed and corroded (7.1.1 (a) (i))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Leading spring hanger (5.3.6 (a) (i))

Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill holed and corroded (7.1.1 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Chassis holed within 30 cm of leading spring hanger (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Leading spring hanger (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake hose has slight corrosion to ferrule All rear ferrules (1.1.12 (f) (i))

Rear Rear shock absorbers corroded - N/S and O/S

Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis corroded throughout (6.1.1 (c) (i))

Brake hose has slight corrosion to ferrule all hoses corroded (1.1.12 (f) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened o/s/f n/s/f (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened o/s/f n/s/f (5.3.3 (b) (i))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

exhaust corroded

Front Oil leaking excessively from engine (8.4.1 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s sill beside seat belt mounting point (6.1.1 (c) (i))

Brake hose has slight corrosion to ferrule all hoses corroded (1.1.12 (f) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened o/s/f n/s/f (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened o/s/f n/s/f (5.3.3 (b) (i))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

exhaust corroded

Front Brake hose has slight corrosion to ferrule Both sides (1.1.12 (f) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Spring eye mounting points both sides (5.3.6 (a) (i))

Front Brake hose has slight corrosion to ferrule Both sides (1.1.12 (f) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Emissions not tested Due to major leak (8.2.2.2 (e))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Brake hose has slight corrosion to ferrule Both sides (1.1.12 (f) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe excessively corroded front to rear (1.1.11 (c))

Nearside Rear Brake pipe excessively corroded to flexi (1.1.11 (c))

Offside Rear Brake pipe excessively corroded to flexi (1.1.11 (c))

Offside Rear Leaf spring fractured (5.3.1 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Rear Brake pipe leaking on a hydraulic braking system pipe on n/s (1.1.11 (b) (ii)) DANGEROUS

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front cut on tyre wall

Offside Front Brake pad(s) wearing thin (3.5.1g)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake is causing the steering wheel to severely pull one way (3.7.C.2)

Service brake is causing the vehicle to swerve to the nearside (3.7.C.2)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Rear Stop lamp not working (1.2.1b)

Parking brake: efficiency below requirements (3.7.B.7)