1982 BMW 316

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Horn not working (7.7 (a))

Nearside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Headlamp aim too far to the right (4.1.2 (a))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

none standard suspension fitted front and rear at time of test

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Front Headlamp aim too low (4.1.2 (a))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Rear fog lamp not working (4.5.1 (a) (ii))

none standard suspension fitted front and rear at time of test

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

exhaust manifold nut missing

front and rear suspension has been lowered

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Hazard warning switch faulty (1.4.B.1d)

Brake pipe slightly corroded (3.6.B.2c)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Vehicle structure has slight corrosion (6.1.A.1)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Vehicle structure has slight corrosion (6.1.A.1)

engine oil leak

rear diff oil leak

Brake pipe slightly corroded (3.6.B.2c)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Vehicle structure has slight corrosion (6.1.A.1)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Vehicle structure has slight corrosion (6.1.A.1)

engine oil leak

rear diff oil leak

Brake pedal spongy (3.3.B.1b)

Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Rear rear parking brake recording little or no effort (3.7.B.6a)

Service brake: efficiency below requirements (3.7.B.7)

Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Vehicle structure has slight corrosion (6.1.B.2)

Vehicle structure has slight corrosion (6.1.B.2)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Outer Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)