2004 Piaggio Zip

centre stand

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Headlamp aim not tested (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Centre Stand

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear damper return action slow.

Tyre worn close to the legal limit (4.1.3(i))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front wheel bearings are excessively rough (2.3.5b)

Headlamp aim beam image kick up to the offside (1.6)

Nearside Steering lock stop ineffective (2.1.3)

Offside Direction indicator flashing more than 120 times per minute (1.5.1c)

Offside Steering lock stop ineffective (2.1.3)

Stop lamp does not emit a steady light (1.3.1b)

Front anb Rear Tyres under inflaited

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering movement slightly 'notchy' (2.2.1b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Steering movement slightly 'notchy' (2.2.1b)

Steering movement slightly 'notchy' (2.2.1b)

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Headlamp aim too low (1.6)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Steering movement slightly 'notchy' (2.2.1b)

Steering movement slightly 'notchy' (2.2.1a)

Exhaust excessively deteriorated (7.1.1a)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))