2005 Aprilia RS 50

Nearside Front Direction indicator with a multiple light source up to 1/2 not functioning (4.4.1 (a) (i))

Offside Front Direction indicator with a multiple light source up to 1/2 not functioning (4.4.1 (a) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Horn not working (7.7 (a))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Nearside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii))

Offside Handlebar mounting insecure (2.2.1 (a) (i))

Rear Position lamp not working (4.2.1 (a))

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

Nearside Front Direction indicator with a multiple light source up to 1/2 not functioning (4.4.1 (a) (i))

Offside Front Direction indicator with a multiple light source up to 1/2 not functioning (4.4.1 (a) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Brake binding but not excessively (1.2.1 (f))

Headlamp light intensity reduced (4.1.4 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Headlamp aim unable to be tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Position lamp not working (4.2.1 (a))

Front Brake binding but not excessively (1.2.1 (f))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear suspension bush has slight free play (2.4.A2a(i))

Front Brake disc(s) slightly worn (3.2.A1l)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) slightly scored (3.2.A1l)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Front wheel bearings are slightly rough (2.3.5b)

Front Wheel damaged but not significantly reducing the original strength (4.2.1a)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Drive chain sprocket slightly worn (6.2.1e)

Front wheel bearings are excessively rough (2.3.5b)

Headlamp aim too high (1.6)

Nearside Rear suspension bush has excessive free play (2.4.A2a(i))

Offside Rear suspension bush has excessive free play (2.4.A2a(i))

Rear Brake pedal insecure (3.1.2a)

Steering control handlebar movement restricted by trapped cables (2.1.2c)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) slightly scored (3.2.A1l)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Wheel damaged but not significantly reducing the original strength (4.2.1a)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Drive chain sprocket slightly worn (6.2.1e)

gear linkage worn

wireing needs attention by steering

Brake pedal attachment screws loose (3.1.2b)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Headlamp aim too low (1.6)

Nearside Handlebar deformed (2.1.1b)

Offside Handlebar deformed (2.1.1b)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Nearside Handlebar mounting clamp bolt loose (2.1.1a) DANGEROUS

Offside Handlebar mounting clamp bolt loose (2.1.1a) DANGEROUS

Brake lever is short but brake can still be readily applied (3.1.3c)

Brake pedal is damaged but the brake can still be readily applied (3.1.3c)

Rear Drive chain sprocket slightly worn (6.2.1e)

fairing mounting bolts missing- not excessively insecure

ignition switch operating but incomplete and insecure to top yoke

offside pillion footrest will not unfold

temporary type fuel cap(lockable and sealed by means of thumb screw)fitted

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

offside pillion footrest jammed in closed position-freed same

Headlamp aim too low (1.6)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

offside pillion footrest jammed in closed position-freed same

Rear Drive chain worn to excess (6.2.1e)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

front axle pin/retainer spacers washers missing