2006 Yamaha Wr 450 F

Chain guard missing ()

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy Baffle fitted. (8.1.1 (a))

Headlamp light intensity reduced (4.1.4 (a))

Rear Wheel spoke slightly loose (5.2.2 (d))

Chain guard missing ()

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy Baffle fitted. (8.1.1 (a))

Headlamp aim too low (4.1.2 (a))

Headlamp light intensity reduced (4.1.4 (a))

Rear Wheel spoke slightly loose (5.2.2 (d))

All position lamps not working (4.2.1 (a))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Headlamp aim unable to be tested (4.1.2 (b))

Headlamp insecure Bulb (4.1.1 (c))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Registration plate missing (0.1 (a))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Stop lamp not working (4.3.1 (a) (ii))

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

Chain guard missing ()

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Wheel spoke slightly loose (5.2.2 (d))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Horn not working (1.7.3a)

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Exhaust noisy (7.1.2)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Chain guard missing

Exhaust noisy (7.1.2)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear shock absorber has a light misting (2.4.A.1c)

no indicators fitted to the bike as it is rider only and mainly for off road use.

offside front fork tube making contact with the cdi control box when at full lock, this does not affect the steering at all.

Headlamp aim too low (1.6)

Horn not working (1.7.3a)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Nearside Rear Direction indicator missing (1.5.1a)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Rear Direction indicator missing (1.5.1a)

Offside Wheel alignment incorrect which adversely affects the handling (2.5.1)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Chain guard missing

Drive chain slightly loose (6.2.1d)

Front Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Rear shock absorber has a light misting (2.4.A.1c)

both the front and the rear tyres feel very soft.

front tyre tread very low also wearing unevenly.

the offside front fork making contact with the cdi control box when the steering is turned onto the righthad lock.