2006 Kawasaki ZX6

Rear Stop lamp switch does not operate in accordance with the requirements front control switch (4.3.2 (a) (i))

Drive chain slightly loose (6.2.1d)

Exhaust slightly deteriorated clamp broken (7.1.1a)

Front Brake fluid reservoir slightly damaged cracked but not leaking (3.2.B1b)

Front Drive chain sprocket slightly worn (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Oil leak ()

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear position lamp deteriorated but function not impaired (1.1.1b)

front fork dust seals deteriorated

Headlamp aim too low (1.6)

Rear Rear wheel bearings are excessively rough (2.4.A.2c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Stop lamp does not illuminate immediately a brake applies front brake (1.3.1a)

Drive chain slightly loose (6.2.1d)

Exhaust slightly deteriorated clamp broken (7.1.1a)

Front Brake fluid reservoir slightly damaged cracked but not leaking (3.2.B1b)

Front Drive chain sprocket slightly worn (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Oil leak ()

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Rear wheel bearings have slight free play (2.4.A.2c)

Rear position lamp deteriorated but function not impaired (1.1.1b)

front fork dust seals deteriorated

Drive chain slightly tight (6.2.1d)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front wheel bearings have excessive free play (2.3.5b)

Drive chain slightly tight (6.2.1d)

Clutch lever incorrectly positioned. bush worn (6.2.1g)

Drive chain slightly loose (6.2.1d)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Brake pad(s) close to minimum limit corroded - anti rattle pins worn (3.2.A1f(i))

Front Front suspension assembly slightly corroded. fork dust seals (2.3.1)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

clutch lever operation is stiff

Front wheel bearings have excessive free play (2.3.5b)

Horn not working (1.7.3a)

Nearside Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear reflector on motorcycle missing (1.4.1)

Registration plate incorrect (6.3.1a)

Exhaust noisy (7.1.2)

Exhaust noisy (7.1.2)