2007 Aprilia SX 50 MY06

Handlebar deformed but serviceable (2.2.1 (c) (i))

Suspension pin, bush or joint worn but not resulting in excessive movement Rear shock lower bush. (5.3.4 (a) (i))

Wheel spoke excessively loose 3 outer spokes in rear wheel. (5.2.2 (d))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Handlebar deformed but serviceable (2.2.1 (c) (i))

Suspension pin, bush or joint worn but not resulting in excessive movement Rear shock lower bush. (5.3.4 (a) (i))

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Nearside Direction indicator not working (1.5.1c)

Offside Direction indicator not working (1.5.1c)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

rear lens missing

Brake pedal is bent and the brake cannot be readily applied (3.1.3c)

Horn not working (1.7.3a)

Offside Rear Direction indicator insecure (1.5.3b)

Rear reflector on motorcycle incorrectly positioned (1.4.2d)

Choke cable hanging down from engine

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front wheel bearings have slight free play (2.3.5b)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Drive chain slightly tight (6.2.1d)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Registration plate deteriorated (6.3.1d)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Front wheel bearings have slight free play (2.3.5b)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Drive chain slightly tight (6.2.1d)

Rear wheel has a loose wheel nut(s) (4.2.3a)

Drive chain slightly loose (6.2.1d)

Front Tyre worn close to the legal limit (4.1.3(i))

Chain guard missing

Front Brake disc(s) has slight run out (3.2.A1m)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front position lamp insecure (1.1.1c)

Headlamp aim too low (1.6)

Offside Rear Direction indicators not working (1.5.1c)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Chain guard missing

Front Brake disc(s) has slight run out (3.2.A1m)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)