2007 Rieju RS2

Nearside Front Upper Front suspension has slight corrosion (2.3.8)

Offside Front Upper Front suspension has slight corrosion (2.3.8)

Centre Front Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Centre Front Riders seat insecure bolt missing to secure seat (6.2.1a)

Centre Front Upper Steering headbearing has excessive free play steering head bearings need adjusting (2.2.2)

Centre Rear Rear reflector on motorcycle missing (1.4.1)

Centre Rear Tyre tread depth is below minimum requirements of 1.0mm tyre tread barely visible on centre of rear tyre (4.1.3(ii))

Offside Rear Brake component is slightly corroded corrosion on rear disc, not helping with pad wear (3.1.5)

Drive chain excessively tight (6.2.1d)

Front Brake lever cannot be applied smoothly (3.1.3d)

Front Floor brake test indicates a binding brake (3.3.C2c)

Headlamp aim beam image kick up to the offside (1.6)

Rear Seat insecure (6.2.1a)

Rear suspension bush has excessive free play (2.4.A2a(i))

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Steering movement excessively rough with the weight on the lower bearing (2.2.1a)

Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Riders seat insecure (6.2.1a) DANGEROUS

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a) DANGEROUS

Wheel alignment incorrect which adversely affects the steering (2.5.1) DANGEROUS

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pedal pivots slightly worn (3.1.3a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

rear nearside indicator has outer lens missing,not affecting operation

Headlamp aim too high (1.6)

Headlamp insecure (1.2.3b)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking (6.1.1c)

Nearside Front Footrest insecure (6.2.1a)

Nearside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls (2.1.2b)

Rear Drive chain excessively loose (6.2.1d)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Steering headbearing has excessive free play (2.2.2) DANGEROUS

Front Tyre worn close to the legal limit (4.1.3(ii))

Front wheel bearings have slight free play (2.3.5b)

Rear Brake pedal pivots slightly worn (3.1.3a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

rear nearside indicator has outer lens missing,not affecting operation

Front Headlamp insecure (1.2.3b)

Front Headlamp aim too high (1.6)

Front Steering headbearing has excessive free play (2.2.2)

Front wheel bearings are excessively rough (2.3.5b)

Nearside Front Footrest insecure (6.2.1a)

Offside Steering lock stop ineffective (2.1.3)

Rear Drive chain excessively loose (6.2.1d)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Brake disc(s) has slight run out (3.2.A1m)

rear nearside indicator has a lens missing