2013 Superbyke Rmr 125

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Rear Brake hose leaking (1.1.12 (c)) DANGEROUS

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Footrest missing both rear (6.2.1a)

Front Brake lever attachment screws loose (3.1.2b)

Front Brake lever insecure locking nut missing (3.1.2a)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Nearside Rear Direction indicator insecure (1.5.3b)

Offside Rear Direction indicator damaged and function impaired (1.5.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Wheel spoke cracked. one spoke snapped (4.2.1b)

Rear reflector on motorcycle obscured (1.4.2b)

Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Rear suspension bearing has excessive free play bottom linking all bearings (2.4.A2a(i))

Rear suspension bush has excessive free play top shock mount (2.4.A2a(i))

Registration plate character(s) likely to be misread reg plate damaged (scratched) (6.3.4b)

Steering movement excessively 'notchy' with the wheel raised bearings braking up ? (2.2.1b)

Steering movement excessively rough with the wheel raised bearings braking up ? (2.2.1b)

Throttle operating incorrectly throttle assembly twists on handle bar (6.2.1f)

Throttle operating incorrectly throttle tube damaged grip holding throttle open (6.2.1f)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Rear wheel bearings have excessive free play (2.4.A.2c) DANGEROUS

Clutch lever shortened. modified with tube tape and duck tape (6.2.1g)

Exhaust is leaking but is not excessively noisey all joints (7.1.1b)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front wheel bearings are slightly rough (2.3.5b)

Nearside Oil leak engine ()

Nearside Rear hole in rear sub frame looks like dill hole

Nearside switch gear loose

Rear Brake pedal pivots slightly worn (3.1.3a)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Steering headbearing has slight free play (2.2.2)

clutch lever pivot worn

petrol tank held on with cable ties at the front