2013 Yamaha Yzf

Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Position lamp not working (4.2.1 (a))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Exhaust noisy (8.1.1 (a))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside All direction indicators not working (4.4.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Direction indicator insecure (4.4.1 (c) (i))

Nearside Non obligatory mirror damaged mirror loose ()

gear change rubber missing

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition silencer??? very noisy and insecure (8.1.1 (a))

Front Brake indicates excessive fluctuation of brake effort excess fluctuation felt pulsing through lever (1.2.1 (e))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Nearside Front Direction indicator with a multiple light source up to 1/2 not functioning (4.4.1 (a) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Exhaust noisy (8.1.1 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Front Shock absorber has a serious fluid leak Both forks (5.3.2 (b))

Nearside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii))

Rear Footrest missing (6.2.12 (a))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Offside Rear Position lamp incorrect colour Blue (4.2.3 (a) (i))

Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Exhaust slightly loose silencer not secure (6.1.2 (a))

Front Mudguard insecure bolt missing from left side ()

Offside Front Position lamp incorrect colour blue sidelight (4.2.3 (a) (i))

Central Rear Lower Suspension component pin or bush excessively worn suspension bushes have excessive play (5.3.4 (a) (i))

Front Brake indicates excessive fluctuation of brake effort fluctuation of 25kg (1.2.1 (e))

Headlamp aim too high (4.1.2 (a))

Offside Front Direction indicator not working not working (4.4.1 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Exhaust slightly loose silencer not secure (6.1.2 (a))

Front Mudguard insecure bolt missing from left side ()

Offside Front Position lamp incorrect colour blue sidelight (4.2.3 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources right lamp flickering but not operational. other two not working at all (4.7.1 (b) (i))

Front Brake disc(s) slightly worn close to min thickness 3.5mm (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear mono-shock pivot worn but not excessive (2.4.B.4)

movement in clutch lever pivot point

reg plate loose but not likely to fall off

screen securing bolts sharp/pointed

Front Brake disc(s) slightly worn (3.2.A1l)

Offside Front shock absorber has light misting of stanchion (2.3.3)

slight play in rear shock lower linkage

Front Brake disc(s) slightly worn (3.2.A1l)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear reflector on motorcycle missing (1.4.1)

slight play in rear shock lower linkage

Front Floor brake test indicates a binding brake (3.3.C2c)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))