2002 MG Zr

Front Oil leak, but not excessive (8.4.1 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced outer sill corroded + undersealed well (6.1.1 (c) (i))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

all suspension parts corroded

Offside Front Suspension component ball joint has slight play (5.3.4 (a) (i))

all undersealed black

Central Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Coil spring corroded all (5.3.1 (b) (i))

Front Brake hose slightly deteriorated o/s and n/s (1.1.12 (b) (ii))

Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced o/s and n/s (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened o/s and n/s (5.3.3 (b) (i))

Rear Brake hose slightly deteriorated o/s and n/s (1.1.12 (b) (ii))

Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced o/s and n/s (5.3.3 (b) (i))

all underside corroded but not weak

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Rear Service brake has no recorded effort at a wheel o/s and n/s (1.2.1 (a) (ii)) DANGEROUS

Coil spring corroded all (5.3.1 (b) (i))

Front Brake hose slightly deteriorated o/s and n/s (1.1.12 (b) (ii))

Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced o/s and n/s (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened o/s and n/s (5.3.3 (b) (i))

Rear Brake hose slightly deteriorated o/s and n/s (1.1.12 (b) (ii))

Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced o/s and n/s (5.3.3 (b) (i))

all underside corroded but not weak

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Power steering pipe(s) or hose(s) leaking from a joint (2.3.3b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nail in nearside rear tyre

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside front brake binding (3.7.B.1)

Offside Steering rack gaiter split (2.2.D.2d)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside front brake binding (3.7.B.1)

slight cracking to nearside @ offside rear tyre walls

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Power steering pipe(s) or hose(s) leaking (2.3.3b)