2002 Mazda 6

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill. (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS

Offside Rear Track rod end ball joint worn to the extent there is a serious risk of detachment Tracking adjustment rod threads strip internal in track arm. (2.1.3 (b) (ii)) DANGEROUS

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive all fronts (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive all rears (5.3.6 (a) (i))

Front and rear subframes and all suspension components have surface corrosion

Front and rear subframes and all suspension components have surface corrosion

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

All major component corroded. just met requirements.

Both rear wheel arch surface corrosion.

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Outer sill and wing corrosion not with in prescribed area.

Nearside Suspension component mounting prescribed area is corroded but not considered excessive Inner sill. (5.3.6 (a) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively split (3.4 (b) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner sill corroded. (5.3.6 (a) (ii)) DANGEROUS

Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner sill corroded. (5.3.6 (a) (ii)) DANGEROUS

All major component corroded. just met requirements.

Both rear wheel arch surface corrosion.

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Outer sill and wing corrosion not with in prescribed area.

Nearside Suspension component mounting prescribed area is corroded but not considered excessive Inner sill. (5.3.6 (a) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Suspension rod corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a))

Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Rear Suspension rod corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Tyre worn close to the legal limit 3mm (4.1.E.1)

Nearside Rear Tie bar/rod which is adjustable, loose in adjustment threads (2.4.G.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Tie bar/rod which is adjustable, loose in adjustment threads (2.4.G.1)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Tyre worn close to the legal limit 3mm (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt front (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Child seat fitted not allowing full inspection of adult belt

exhaust deteriorated

nearside rear outer wheel arch corroded

Offside Headlamp aim too high (1.8)

Front Brake pad(s) wearing thin (3.5.1g)

Headlamp aim too low (1.8)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Rear Brake pad(s) wearing thin (3.5.1g)

both rear tyres wearing edges

rear exhaust hanger poor condition

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Rear Brake pad(s) wearing thin (3.5.1g)

both rear tyres wearing edges

rear exhaust hanger poor condition

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

both rear tyres wearing edges

slight noise nearside front wheel bearing

both front tyres wearing edges

Offside Front Tyre worn close to the legal limit (4.1.E.1)

nearside front tyre worn to legal limit

Front Brake pad(s) wearing thin (3.5.1g)