2004 Fiat Ducato

Headlamp lens slightly defective BOTH (4.1.1 (b) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced CHASSIS RAIL BY BRAKE PIPES (6.1.1 (c) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced CROSS MEMBER (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced CHASSIS RAIL BY BRAKE PIPES (6.1.1 (c) (i))

Offside Front Lower Suspension arm pin or bush excessively worn REAR BUSH (5.3.4 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Windscreen washer not working (3.5 (a))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Central Brake lever has restricted free movement (1.1.15 (e))

Offside Rear Brake cable damaged (1.1.15 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Radiator mount corroded

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Jacking point (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front brake flexi insecure

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Radiator mount corroded

Towbar component corroded, but not excessively (6.1.6 (a))

Front Radiator Support Panel Corroded

General Body Work Underneath Corrosion Present

Rear Both Rear Springs Begin To Flatten

Horn not working (7.7 (a) (ii))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Radiator Support Panel Corroded

General Body Work Underneath Corrosion Present

Rear Both Rear Springs Begin To Flatten

Front cross member corroded.

General Vehicle condition underneath poor.

Vehicle body heavily undersealed not allowing full inspection.

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper arch (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point area (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch/chassis (5.3.6 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point area and chassis (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front hanger outrigger (5.3.6 (a) (i))

Front cross member corroded.

General Vehicle condition underneath poor.

Front Vehicle structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner wing (6.1.1 (c) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner wing (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced general underbody (6.1.1 (c) (i))

Brake pad(s) wear indicator illuminated (1.1.13 (a) (i))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i))

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Undertray insecure (8.1.1 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner wing (6.1.1 (c) (i))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner wing (6.1.1 (c) (i))

corrosion to front crossmember

various small areas of underbody and component corrosion showing

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

front brake application uneven (3.7.B.2)

front brake excessively fluctuating (3.7.B.3)

Nearside Rear sidewall worn

front cross member corroded

nearside and offside inner sills corroded