2010 Ssangyong Rexton

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Brake performance unable to be tested (1.2.1 (g))

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) DANGEROUS

Offside Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) DANGEROUS

Items removed from driver's view prior to test ()

Nearside Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Brake pedal wearing smooth (1.1.2 (c))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Brake pedal wearing smooth (1.1.2 (c))

Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Lower Suspension rod ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Lower Suspension rod ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced NEAR COIL SPRING MOUNTING (6.1.1 (c) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Shock absorbers has a reduced damping effect (5.3.2 (d))

UNDERSEALED BLACK

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Brake cable has restricted free movement (1.1.15 (e))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

rear chassis corroded and delaminated

Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Brake cable has restricted free movement (3.5.1k)

Parking brake: efficiency below requirements (3.7.C.1b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Engine covers fitted obscuring some components in the engine bay

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Rear position lamp(s) not working (1.1.A.3b)

Engine covers fitted obscuring some components in the engine bay

Oil leak

Parking brake lever has little reserve travel (3.1.6b)