2011 Derbi Senda

Both mirrors not fitted at time of test

Drive chain slightly tight (6.1.7 (k) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Chain guard missing

Registration plate deteriorated but not likely to be misread (0.1 (b))

Both mirrors not fitted at time of test

Brake back plate insecure (1.1.14 (d))

Drive chain slightly tight (6.1.7 (k) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Rear Chain guard missing

Registration plate deteriorated but not likely to be misread (0.1 (b))

Exhaust noisy (8.1.1 (a))

Rear Brake fluid below minimum mark (1.1.10 (d) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

gear change lever loose.

Drive chain slightly loose (6.1.7 (c) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

head light slight loose

Presented for test with front & rear lights temporarily masked. Tested in accordance with daytime MOT requirements. Passed test - implications explained to customer.

Suspension corroded but not seriously weakened R & L fork legs (5.3.3 (b) (i))

Dipswitch does not operate immediately when selected on dipped beam Main coming on with dip (4.1.3 (b))

Drive chain excessively tight (6.1.7 (k) (i))

Rear Drive chain sprocket excessively loose Bolt missing (6.1.7 (c) (i))

Rear reflector missing (4.8.2 (a) (ii))

Rear Brake disc insecure Bolt missing (1.1.14 (a) (ii)) DANGEROUS

Suspension corroded but not seriously weakened R & L fork legs (5.3.3 (b) (i))

Wheel alignment slightly misaligned (2.4 (a))

Front Suspension corroded but not seriously weakened Both fork legs (5.3.3 (b) (i))

Rear brake disc has 1 retaining bolt missing

Drive chain excessively tight (6.1.7 (k) (i))

Front Suspension corroded but not seriously weakened Both fork legs (5.3.3 (b) (i))

Rear brake disc has 1 retaining bolt missing

Exhaust noisy (8.1.1 (a))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

brake disc 1 bolt missing on rear

Drive chain worn to excess (6.1.7 (c) (i))

Front Drive chain sprocket worn to excess (6.1.7 (c) (i))

Rear Drive chain worn to excess (6.1.7 (c) (i))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Exhaust noisy (8.1.1 (a))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

brake disc 1 bolt missing on rear

Front wheel bearings are slightly rough (2.3.5b)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Front Tyre has a bulge caused by separation or partial failure of its structure (4.1.2a(ii))

Front wheel bearings are excessively rough (2.3.5b)

Horn not working (1.7.3a)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear suspension bearing has excessive free play swing arm (2.4.A2a(i))

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Stop lamp missing front brake lamp switch (1.3.3a)

Coolant leak

Exhaust noisy (7.1.2)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front wheel bearings have slight free play (2.3.5b)

Rear wheel bearings have slight free play (2.4.A.2c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Wheel alignment slightly misaligned. (2.5.1)