2017 Ajs Modena

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Headlamp aim too low (4.1.2 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Tyre worn close to the legal limit cracking all over but no core exposed just 1mm borderline (5.2.3 (e))

Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Registration plate lamp throwing direct white light to the rear (4.7.1 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Brake lever has insufficient reserve travel (1.1.2 (a))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Tyre worn close to the legal limit cracking all over but no core exposed just 1mm borderline (5.2.3 (e))

Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Registration plate lamp throwing direct white light to the rear (4.7.1 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front tyre slight cracking

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Front tyre slight cracking

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front tyre slightly cracking

Headlamp aim too high (4.1.2 (a))

Nearside Brake lever has insufficient reserve travel (1.1.2 (a))

Rear Tyre has a tear caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Front tyre slightly cracking

Front Brake binding but not excessively (1.2.1 (f))

Headlamp aim too high (4.1.2 (a))

Rear reflector missing (4.8.2 (a) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Brake binding but not excessively (1.2.1 (f))