MOT Status
ValidMileage
167,668 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Integral body structure is corroded but structural rigidity is not significantly reduced All (6.1.1 (c) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))
Nearside Play in steering rack inner joint(s)
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Central (6.2.2 (d) (i))
Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))
Nearside Play in steering rack inner joint(s)
Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
underbody coated at sealant
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
underbody coated at sealant
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Brake hose slightly deteriorated both (1.1.12 (b) (ii))
vehicle underside heavily undersealed
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Brake hose slightly deteriorated both (1.1.12 (b) (ii))
Windscreen washer not working (3.5 (a))
vehicle underside heavily undersealed
Nearside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
underbody fully sprayed sealant
Wheel/tyre protruding beyond wheel arch
Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Windscreen washer not working (3.5 (a))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Child Seat fitted not allowing full inspection of adult belt
Offside Play in steering rack inner joint(s)
Rear Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))
Wheel/tyre protruding beyond wheel arch
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))
Front Play in steering rack inner joint(s) both sides
under body under sealed
Front Headlamps matched pair incorrect colour (4.1.4 (a))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Front Play in steering rack inner joint(s) both sides
under body under sealed
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Brake pipe corroded, covered in grease or other material front to rear x2 (1.1.11 (c))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Central Brake pipe slightly corroded FRONT TO REAR (3.6.B.2c)
Front Brake pipe slightly corroded O/S & N/S (3.6.B.2c)
Rear Brake pipe slightly corroded O/S & N/S (3.6.B.2c)
Rear coil spring corroded O/S & N/S (2.4.C.1b)
Central Brake pipe slightly corroded both front to rear in to load sensing valve (3.6.B.2c)
Headlamp has a product on the light source but not seriously reducing light output both (1.7.5a)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Brake cable has wires broken but is not significantly weakened both cables on rear trailing arm (3.5.1b)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Valve stem seriously damaged (4.1.D.1e)
Nearside Side repeater incorrect colour (1.4.A.2f)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower inner wheel arch/ front of the offside cill (6.1.B.2)
Offside Rear rear brake recording little or no effort (3.7.B.5a)
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Central Brake pipe slightly corroded both front to rear in to load sensing valve (3.6.B.2c)
Front Inner brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Headlamp has a product on the light source but not seriously reducing light output both (1.7.5a)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Side repeater slightly discoloured (1.4.A.2f)
Rear Brake cable has wires broken but is not significantly weakened both cables on rear trailing arm (3.5.1b)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front front brake application uneven (3.7.B.2)
Offside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Rear front parking (secondary) brakes imbalanced (3.7.B.6b)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
nearside rear tyre worn on inner edge
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Side repeater not working (1.4.A.2c)
Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
nearside rear tyre worn on inner edge
Nearside Front Track rod end ball joint has slight play (2.2.B.1f)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear coil spring corroded (2.4.C.1b)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Parking brake recording little or no effort (3.7.D.3a)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.D.4)
All brake pipes slightly corroded
Both outer sills corroded and holed
Underside of vehicle corroded
offside front brake pipe covered at time of test
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Side repeater incorrect colour (1.4.A.2f)
Service brake: efficiency below requirements (3.7.B.7) DANGEROUS
All brake pipes slightly corroded
Both outer sills corroded and holed
Offside handbrake cable broken
Underside of vehicle corroded
both inner and outer sills corroding
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
X162 OBH is a 2000 Mercedes-benz Vito in Purple with a 2,151cc diesel engine. This vehicle has been through 33 MOT tests with a personal pass rate of 60.6%.
Across all 2000 Mercedes-benz Vito models, the average MOT pass rate is 62.9% with a typical mileage of 111,462 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying X162 OBH, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 26 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of X162 OBH?
You can check the full history of X162 OBH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was X162 OBH registered?
X162 OBH is a 2000 Mercedes-benz Vito, first registered on 17 November 2000.
Is X162 OBH safe to buy?
The MOT history for X162 OBH shows 33 tests with a 60.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does X162 OBH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on X162 OBH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.