MOT Status
ExpiredMileage
144,788 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
welding repaair to n/s floor from inside car, unable to assess as carpet covering repair.
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
welding repaair to n/s floor from inside car, unable to assess as carpet covering repair.
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Centre Steering rack gaiter split (2.2.D.2d)
Offside Outer Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front Lower Ball joint has slight play (2.2.B.1f)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Lower Ball joint has slight play (2.2.B.1f)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Steering rack gaiter split (2.2.D.2d)
Offside Steering rack gaiter missing (2.2.D.2d)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Shock absorber has a slightly reduced damping effect (2.7.5)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Brake pedal creeps down while the pedal is held under pressure (3.3.B.1a)
Brake pedal creeps with the vacuum fully depleted (3.3.C.2)
Brake pedal has insufficient reserve movement (3.3.A.5)
Brake pedal spongy (3.3.B.1b)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Rear Braking system leaking (3.6.A.1)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Shock absorber has a slightly reduced damping effect (2.7.5)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Brake pedal has insufficient reserve movement (3.3.A.5)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
Parking brake lever has no reserve travel (3.1.6b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front suspension has a suspension lower ball joint securing nut loose (2.5.B.1a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Upper Shock absorber has an excessively worn shock absorber pivot (2.7.4)
Steering system has slight free play detected at steering wheel (2.2.A.1b)
Nearside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Nearside Stop lamp not working (1.2.1b)
Offside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Peugeot 106?
Based on 2,880,076 MOT tests across 319,421 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
X163 HNH is a 2000 Peugeot 106 in Blue with a 1,527cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 50%.
Across all 2000 Peugeot 106 models, the average MOT pass rate is 66.8% with a typical mileage of 66,731 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 106 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 155,158 recorded failures. If you're considering buying X163 HNH, it's worth having these areas checked by a mechanic before committing.
The Peugeot 106 typically stays on UK roads for around 34 years. At 26 years old, this Peugeot 106 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of X163 HNH?
You can check the full history of X163 HNH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was X163 HNH registered?
X163 HNH is a 2000 Peugeot 106, first registered on 15 September 2000.
Is X163 HNH safe to buy?
The MOT history for X163 HNH shows 20 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does X163 HNH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on X163 HNH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.