2000 Honda Cr-v

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear both rear inner arches corroded

Rear both trailing arms corroded

Rear subframe corroded

exhaust system corroded

Nearside Front Lower Suspension arm pin or bush excessively worn front bush (5.3.4 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Brake lever has insufficient reserve travel (1.1.2 (a))

Emissions unable to be completed (8.2.2.2 (e))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

both rear tyres cracking

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

rear exhaust box noisy

Brake pedal rubber worn

Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt Both sides (2.4.G.2)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement Main bush both sides (2.4.G.2)

Brake pedal rubber worn

Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt Both sides (2.4.G.2)

Nearside Stop lamp not working (1.2.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement Main bush both sides (2.4.G.2)

Nearside Rear Seat belt damaged sufficient to significantly weakened the webbing (5.2.2a)

Offside Rear Seat belt has a cut which has significantly weakened the webbing (5.2.2a)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Offside Rear Seat belt damaged sufficient to significantly weakened the webbing (5.2.2a)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Rear Seat belt has a cut which has significantly weakened the webbing (5.2.2a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Seat belt damaged but webbing not significantly weakened (5.2.2a)

Offside Rear Seat belt stitching badly frayed (5.2.2b)

perishing to n/s/r o/s/r tyres

Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

perishing to n/s/r o/s/r tyres