2001 Honda NSR125

Drive chain slightly loose (6.2.1d)

Headlamp damaged but function not impaired (1.2.3a)

Front position lamp damaged but function not impaired (1.1.1b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Indicator switch defective (1.5.4)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Footrest missing (6.2.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Rear Brake pipe excessively damaged (3.2.B2a) DANGEROUS

Front position lamp damaged but function not impaired (1.1.1b)

Rear Fairings insecure but not likely to impede the steering (2.1.2e)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Offside Front shock absorber has light misting of stanchion (2.3.3)

fairings damaged

Brake lever has inadequate reserve travel (3.1.3b)

Drive chain excessively tight (6.2.1d)

Fairings insecure and likely to impede the steering (2.1.2e)

Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking (6.1.1c)

Front position lamp insecure (1.1.1c)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nearside Rear Footrest missing (6.2.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pedal is positioned so that the brake cannot be readily applied (3.1.3c)

Rear Rear wheel bearings are excessively rough (2.4.A.2c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Riders seat insecure (6.2.1a)

Throttle operating incorrectly (6.2.1f)

Direction indicators flashing more than 120 times per minute (1.5.1c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Offside Rear Direction indicator insecure (1.5.3b)

Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Brake disc(s) slightly scored (3.2.A1l)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear Brake master cylinder has a seized master cylinder pivot. (3.2.B5)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pedal cannot be released smoothly (3.1.3d)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)

advise n/s mirror needs attension n/s o/s fork stansions pitted clucth cable needs lubing fairing needs attension