2000 Chrysler-jeep Pt Cruiser

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring/shock mounting (5.3.6 (a) (i))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Rear Sub-frame corroded and seriously weakened axle corroded at O/S spring (5.3.3 (b) (i))

Rear Suspension arm pin or bush excessively worn watts linkage bushes (5.3.4 (a) (i))

Nearside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii)) DANGEROUS

Offside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii)) DANGEROUS

Brake fluid warning lamp illuminated (1.1.10 (f))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive spring/shock mount (5.3.6 (a) (i))

Offside Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive both rear brake back plates (1.1.21 (e) (i))

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Coil spring corroded (5.3.1 (b) (i))

Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension spring mounting prescribed area is corroded but not considered excessive both (5.3.6 (a) (i))

Front Brake pipe slightly corroded both - flexi steel section to caliper (3.6.B.2c)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive Sill (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Front Brake pipe slightly corroded both - flexi steel section to caliper (3.6.B.2c)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive Sill (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Nearside Front Sub-frame corroded and seriously weakened at front suspension arm mount (2.4.G.1)

Offside Front Subframe mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside front brake fluctuating, but not excessively (3.7.B.3)

offside rear tyre has a screw in it

Tyre worn close to the legal limit (4.1.E.1)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Tyre worn close to the legal limit (4.1.E.1)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Tyre worn close to the legal limit (4.1.E.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Suspension joint nearside lower dust cover split/missing

Suspension joint offside lower dust cover split/missing

Tyre worn close to the legal limit (4.1.E.1)

Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Wheel nut(s) missing (4.2.A.1e)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)