2000 MG Mgf

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement slight movement (5.3.4 (a) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Horn not working (7.7 (a))

Offside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Windscreen washer not working (3.5 (a))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement slight movement (5.3.4 (a) (i))

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

oil leak

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded chasse holed close to antiroll bar mount (2.4.A.3)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

oil leak

Centre Stop lamp not working (1.2.1b)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Headlamp aim beam image obviously incorrect Both sides (1.8.A.1b)

Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Sub-frame corroded and seriously weakened (2.4.G.1)

Rear Suspension arm rubber bush deteriorated resulting in excessive movement Both sides (2.4.G.2)

registration plate character(s) incorrectly spaced Both (6.3.4a)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front registration plate character(s) laid out in an incorrect format (6.3.4f)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Stop lamp adversely affected by the operation of another lamp (1.2.1f)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Rear registration plate character(s) laid out in an incorrect format (6.3.4f)

Registration plate lamp not working (1.1.C.1d)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Engine covers fitted obscuring some components in the engine bay

Battery insecure (1.9.1)

Front registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Spare wheel insecure (6.4.2)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Exhaust system not adequately supported (7.1.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Wheel nut(s) missing (4.2.A.1e)

Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Wheel nut(s) missing (4.2.A.1e)

Offside Rear Wheel nut(s) missing (4.2.A.1e)

Offside Rear wheel bearing rough when rotated (2.6.1)

Offside Side repeater not working (1.4.A.2c)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Brake pad(s) wearing thin (3.5.1g)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Exhaust system not adequately supported (7.1.1)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)

Offside Rear wheel bearing rough when rotated (2.6.1)

Parking brake: efficiency below requirements (3.7.B.7)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Front brake discs corroded

Oil leak

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Tyre fouling a part of the vehicle (4.1.D.2)

Offside Front Tyre fouling a part of the vehicle (4.1.D.2)

Rear Brake pipe excessively corroded (3.6.B.2c)

Offside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

rear brake application uneven (3.7.B.2) DANGEROUS

Coolant leak

Nearside Front Upper Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Rear Brake pipe slightly corroded (3.6.B.2c)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

all four brake disc's corroded.

rear silencer support strap incomplete, exhaust remains adequatley supported.

Front Brake pad(s) wearing thin (3.5.1g)

Front Vehicle structure has slight corrosion (6.1.A.1)

Rear Brake pad(s) wearing thin (3.5.1g)

advised on front/rear both sides disc condition

Emissions not tested (7.0)

Front Lower Shock absorber has an excessively worn bush (2.7.4)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Radius arm has slight play in a pin/bush (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Radius arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front wheel bearing has slight play (2.5.A.3c)

Shock absorber has a slightly worn bush (2.7.4)

brake disc slightly pitted (3.5.1h)

front subframe slight corrosion

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Headlamp aim too high (1.8)

Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake lever has no reserve travel (3.1.6b)

Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Shock absorber has a slightly worn bush (2.7.4)

brake disc slightly pitted (3.5.1h)

front subframe slight corrosion

Nearside Rear Shock absorber has an excessively worn bush (2.7.4)

Offside Rear Shock absorber has an excessively worn bush (2.7.4)