2000 Suzuki Alto

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Inner Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Inner Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Outer Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Inner Subframe mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)

Nearside Front Outer Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Inner Subframe mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)

Offside Front Outer Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Brake pipe slightly corroded across axel (3.6.B.2c)

Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement both front (2.4.G.2)

Nearside Rear Body has slight corrosion inner sill (6.1.B.2)

Offside Rear Body has slight corrosion outer sill (6.1.B.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Offside front brake binding (3.7.B.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Body has slight corrosion inner sill (6.1.B.2)

Offside Rear Body has slight corrosion outer sill (6.1.B.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

oil on minimum

Brake pipe slightly corroded (3.6.B.2c)

both front tyres wearing on outer edges

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Headlamp aim too high and too far to the right. (1.8)

Offside Rear Rear wheel bearing rough when rotated (2.6.1)

Registration plate lamp not working (1.1.C.1d)

Brake pipe slightly corroded (3.6.B.2c)

Parking brake lever has little reserve travel (3.1.6b)

both front tyres wearing on outer edges

Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Offside Front Direction indicator not working (1.4.A.2c)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

osr tyre perished side wall cracking no cord showing

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)