2013 Mazda Bongo

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive under sill (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Horn not working (7.7 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Horn not working (7.7 (a))

Rear fog lamp light intensity significantly reduced (4.5.4 (a))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Horn not working (7.7 (a))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Nearside Front Lower Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

rear wiper blade split, corrosion to inner sill panels and rear wheel arches

Nearside Front Lower Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Exhaust has a major leak of exhaust gases hole in silencer (6.1.2 (a))

Rear fog lamp does not emit a steady red light (4.5.4 (a))

rear wiper blade split, corrosion to inner sill panels and rear wheel arches

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii))

Rear Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))

corrosion several areas under vehicle

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Rear fog lamp does not emit a steady red light (4.5.4 (a))

Rear Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))

corrosion several areas under vehicle

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear fog lamp not working (1.3.2b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Inner Rear position lamp(s) not working (1.1.A.3b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Rear fog lamp not working (1.3.2b)

Nearside Ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Offside Rear Valve stem slightly misaligned (4.1.D.1e)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)