2000 Subaru Legacy

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Offside Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Nearside Rear Anti-roll bar pin or bush excessively worn Dbush (5.3.4 (a) (i))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Fuel Pipe/s corroded ()

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

engine management lamp illuminated

engine oil leaks/drips visible

Offside Front Tyre worn close to legal limit/worn on edge inner edge. (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge inner edge. (5.2.3 (e))

Rear exhaust mounts weak. may fail soon.

brake master cylinder overfilled. rectify asap.

Nearside Front Position lamp not working (4.2.1 (a))

Offside Front Tyre worn close to legal limit/worn on edge inner edge. (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge inner edge. (5.2.3 (e))

Rear exhaust mounts weak. may fail soon.

brake master cylinder overfilled. rectify asap.

Nearside Front Tyre worn close to the legal limit outer edge. (4.1.E.1)

steel brake pipes on rear trailing arms starting to corrode.

Nearside Front Tyre worn close to the legal limit outer edge. (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

steel brake pipes on rear trailing arms starting to corrode.

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)

Emissions not tested (7.3.A.1)

Exhaust system not adequately supported (7.1.1)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Trailing arm rubber bush bonding deteriorated resulting in excessive movement front bush (2.4.G.2)

Nearside Stop lamp not working (1.2.1b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tyre worn close to the legal limit on outer edge (4.1.E.1)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)

Nearside Rear Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tyre worn close to the legal limit on outer edge (4.1.E.1)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)

Nearside Inner Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Inner Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Registration plate lamp not working (1.1.C.1d)

beam image slightly impaired

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)