MOT Status
ValidMileage
151,534 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
exhaust blow and front flexi section in poor condition
rear subframe and suspension components corroded
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Rear Exhaust system insecure (6.1.2 (a))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
exhaust blow and front flexi section in poor condition
rear subframe and suspension components corroded
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced chassis rail (6.1.1 (c) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front door check strap slightly loose
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced chassis rail (6.1.1 (c) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front door check strap slightly loose
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Oil leak, but not excessive sump corroded, would advise changing as nearly rotted through (8.4.1 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Headlamp aim projected beam image is obviously incorrect bulb fitted incorrectly (4.1.2 (c))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Oil leak, but not excessive sump corroded, would advise changing as nearly rotted through (8.4.1 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Exhaust mounting defective Corroded away (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front undertray loose/hanging down
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Exhaust mounting defective Corroded away (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Service brake imbalanced across an axle (1.2.1 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust shrouding insecure
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Sound deadening material not fully secure (8.1.1 (b) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
both front tyres worn
front brake pads worn
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
X200 ACE is a 2008 Mazda 3 in Blue with a 1,598cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 61.5%.
Across all 2008 Mazda 3 models, the average MOT pass rate is 73.8% with a typical mileage of 66,871 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying X200 ACE, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 18 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of X200 ACE?
You can check the full history of X200 ACE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was X200 ACE registered?
X200 ACE is a 2008 Mazda 3, first registered on 18 March 2008.
Is X200 ACE safe to buy?
The MOT history for X200 ACE shows 26 tests with a 61.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does X200 ACE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on X200 ACE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.