2000 Hyundai Accent

Battery insecure (1.9.1)

Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Parking brake lever has no reserve travel (3.1.6b)

rear parking (secondary) brakes imbalanced (3.7.B.6b)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Oil leak

Vehicle's internal headlight adjuster altered to recheck lights

both rear tyres out of shape

eml light on

front lower cross member corroded

oil on min

Front Brake pad(s) wearing thin (3.5.1g)

note/brake pads not fully visible

note/eml light activated

slight bind to offside front brake

slight noise to offside front wheel bearing

Nearside Registration plate lamp not working (1.1.C.1d)

Rear Exhaust system not adequately supported (7.1.1)

Nearside Front Front wheel bearing has excessive play (2.5.A.3c) DANGEROUS

Front Brake pad(s) wearing thin (3.5.1g)

note/brake pads not fully visible

note/eml light activated

slight bind to offside front brake

slight noise to offside front wheel bearing

centre and rear exhaust corroded

high level brake light not working/not able to see if wired

one mount broken on rear exhaust/system still supported

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-lock braking system component excessively damaged (3.4.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

centre and rear exhaust corroded

high level brake light not working/not able to see if wired

one mount broken on rear exhaust/system still supported

nearside front tyre tread worn low on inner edge

note/high level stop light not able to see if wired(not working)

one rear exhaust bracket broken/still supported by two others

Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Stop lamp not working (1.2.1b)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

nearside front tyre tread worn low on inner edge

note/high level stop light not able to see if wired(not working)

one rear exhaust bracket broken/still supported by two others

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Suspension joint nearside lower dust cover split/missing

note/eml light on

one exhaust bracket broken on rear silencer(silencer still supported)

slight signs of oil to steering rack pinion area

Nearside outer track rod end joint cover split/missing

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Suspension joint nearside lower dust cover split/missing

engine management light on

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

exhaust system corroding/deteriorating.

front suspension/subframe corroding.

n/s/r tyre stareting to wear unevenly/out of shape.

n/s/r tyre wearing thin on inner edge.

o/s+n/s/f suspension arms corroding.

o/s/f metal brake pipe corroding.

play in o/s+n/s/f rear subframe bushes.

rear tie bars/suspension arms corroding

slight fluid weep around lower power steering rack.

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not in good working order (function impaired) (1.1.4a)

Offside Registration plate lamp not working (1.1.5c)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

exhaust system corroding/deteriorating.

front suspension/subframe corroding.

n/s/f+n/s/r tyres wearing thin on inner edges.

n/s/r tyre stareting to wear unevenly/out of shape.

o/s+n/s/f suspension arms corroding.

o/s/f brake starting to bind.

o/s/f metal brake pipe corroding.

play in o/s+n/s/f rear subframe bushes.

rear tie bars/suspension arms corroding

slight fluid weep around lower power steering rack.

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Offside Front position lamp(s) not in good working order (function impaired) (1.1.4a)

Direction indicators incorrect colour (1.4.A.2f)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front brake disc excessively pitted (3.5.1h)

Advise: offside front tyre wearing on inner edge.

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

child seat fitted not allowing full inspection of adult belt