MOT Status
ValidMileage
112,759 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Sill (6.1.1 (c) (i))
Nearside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Vehicle Undersealed Not Allowing Full Inspection Of Underside Components
Central Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Central Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Central Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Rear Towbar excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wheel arch (5.3.6 (a) (ii)) DANGEROUS
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor/sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor/sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Nearside Front Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
Offside Front Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
Offside Front Tie bar/rod has slight play in a ball joint (2.4.G.2)
Nearside Front Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
Offside Front Tie bar/rod has slight play in a ball joint (2.4.G.2)
Engine covers fitted obscuring some components in the engine bay
Items removed from driver's view prior to test
Under-trays fitted obscuring some underside components
Headlamps & sidelights showing slight interference / Rear towbar electric fog light not working
Nearside rear tyre low on pressure (topped up for brake test)
Offside front antiroll bar link ball joint has slight play
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Headlamps & sidelights showing slight interference / Rear towbar electric fog light not working
Nearside rear tyre low on pressure (topped up for brake test)
Offside front antiroll bar link ball joint has slight play
all tyres are deteriorating offside rear tyre is wearing on the outer edge.
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
X213 PBA is a 2010 Mazda Bongo in White with a 1,990cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 69.2%.
Across all 2010 Mazda Bongo models, the average MOT pass rate is 66.7% with a typical mileage of 135,155 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying X213 PBA, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 16 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of X213 PBA?
You can check the full history of X213 PBA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was X213 PBA registered?
X213 PBA is a 2010 Mazda Bongo, first registered on 7 July 2010.
Is X213 PBA safe to buy?
The MOT history for X213 PBA shows 26 tests with a 69.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does X213 PBA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on X213 PBA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.