2000 Subaru Forester

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre worn close to legal limit/worn on edge on shoulders (5.2.3 (e))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge on inner (5.2.3 (e))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

door sill covers fitted, not allowing for full inspection

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Brake drum worn, pitted or scored, but not seriously weakened back plates (1.1.14 (a) (ii))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake drum worn, but not excessively rear back plates (1.1.14 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Play in steering rack inner joint(s) both ()

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by seat belt mount (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Play in steering rack inner joint(s) both ()

Rear Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Headlamp aim projected beam image is obviously incorrect both no beam patten (4.1.2 (c))

Nearside Front Steering locking device missing bottom ball joint missing split pin (2.1.3 (d))

Nearside Front Steering locking device missing track rod end missing split pin (2.1.3 (d))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear sill corroded near suspension mounting (5.3.6 (a) (i))

Offside Rear Towbar excessively corroded within 30cm of towbar mounting rear pocket (6.1.6 (i) (i))

Rear Brake pipe likely to become detached or damaged multiple places not attached to vehicle and rubbing on various components (1.1.11 (d) (ii))

Rear Fuel pipe leaking filler neck (6.1.3 (b) (i))

Windscreen washer not working (3.5 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement d.bush (5.3.4 (a) (i))

Nearside Rear Valve stem slightly damaged (5.2.3 (j))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Play in steering rack inner joint(s) both ()

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Suspension arm attachment bracket/mounting insecure arm bolt loose (5.3.3 (a) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Brake pipe leaking on an air braking system (1.1.11 (b) (i))

Offside Rear Fuel pipe leaking (6.1.3 (b) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))

Front Anti-roll bar linkage pin or bush excessively worn both (5.3.4 (a) (i))

Nearside Front Outer Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Outer Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Front Position lamp not working (4.2.1 (a))

Rear Anti-roll bar linkage pin or bush excessively worn both (5.3.4 (a) (i))

Rear Brake pipe excessively corroded (1.1.11 (c))

Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Fuel Pipe/s corroded ()

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Play in steering rack inner joint(s) ()

Offside Rear Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

fuel pipes perished

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Stop lamp not working (1.2.1b)

Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front constant velocity joint gaiter split (2.5.C.1a)