2000 Mercedes-benz Vito

Centre Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Tyre worn close to the legal limit (4.1.E.1)

Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear coil spring corroded (2.4.C.1b)

Vehicle structure has slight corrosion (6.1.B.2)

all welding repairs have been covered with thick shults

Brake load sensing valve seized (3.6.E.3)

Centre Brake pipe excessively corroded (3.6.B.2c)

Driver's door cannot be opened from outside the vehicle (6.2.B.1b)

Emissions not tested (7.0)

Inner Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Inner Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Stop lamp not working (1.2.1b)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Service brake: efficiency below requirements (3.7.B.7)

Front Tyre worn close to the legal limit (4.1.E.1)

Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear coil spring corroded (2.4.C.1b)

Vehicle structure has slight corrosion (6.1.B.2)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

both lower inner bays corroded

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front constant velocity joint is insecure (2.5.C.1b)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

both lower inner bays corroded

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front constant velocity joint is excessively worn (2.5.C.1b)

Offside Front constant velocity joint is insecure (2.5.C.1b)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Rear position lamp(s) incorrect colour (1.1.A.3e)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Stop lamp not working (1.2.1b)

Offside Stop lamp not working (1.2.1b)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front Exhaust system not adequately supported (7.1.1)

Front registration plate deteriorated (6.3.1d)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Stop lamp not working (1.2.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)