2000 Seat Leon

Nearside Front coil spring broken (2.4.C.1a)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Engine covers fitted obscuring some components in the engine bay

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

offside rear floor repaired and heavely under sealed

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Oil leak

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Child seat fitted not allowing full inspection of adult belt

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Headlamp insecure (1.7.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Child seat fitted not allowing full inspection of adult belt

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Child seat fitted not allowing full inspection of adult belt

Nearside front brake disc worn.

Nearside rear brake grabbing slightly (3.7.A.5b)

Offside front brake disc worn.

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Headlamp aim too low and too far to the right. (1.8)

Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear coil spring incomplete (2.4.C.1a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Steering column top bearing slightly worn (2.1.2c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Steering column top bearing slightly worn (2.1.2c)

Rear brake disc slightly scored (3.5.1h)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)