2001 Mazda Bongo

Both inner sills heavily undersealed

Front Brake pad(s) wearing thin All (1.1.13 (a) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Crossmember corroded (6.1.1 (c) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Central Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Front crossmember corroded and holed (6.1.1 (c) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Rear Exhaust has a major leak of exhaust gases silencer holed (6.1.2 (a))

Offside Integral body structure inadequately repaired such that structural rigidity is significantly reduced Inner sill plated inadequately welded (6.1.1 (d) (i))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Both inner sills heavily undersealed

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Crossmember corroded (6.1.1 (c) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Body Out Rigger (6.1.1 (c) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Body Out Rigger (6.1.1 (c) (i))

Emissions unable to be completed Due to exhaust leak (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases Rear flexi pipe (6.1.2 (a))

Nearside Front Integral body structure is fractured and structural rigidity is significantly reduced sill (6.1.1 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Integral body structure is fractured and structural rigidity is significantly reduced sill (6.1.1 (a) (i))

Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Integral body structure is fractured and structural rigidity is significantly reduced sill (6.1.1 (a) (i))

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output o/s & n/s (4.1.4 (b))

Lower radiator panel corroded

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear exhaust shield loose

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Coolant leak Rear heater pipe

Headlamp has a product on the lens but not seriously reducing light output o/s & n/s (4.1.4 (b))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Power steering component has slight seepage from a component Rack (2.1.5 (a))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Coolant leak Rear heater pipe

Headlamp has a product on the lens but not seriously reducing light output o/s & n/s (4.1.4 (b))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Power steering component has slight seepage from a component Rack (2.1.5 (a))

Exhaust mounting defective Bracket at catalyst broken (6.1.2 (a))

Front Tyre worn close to legal limit/worn on edge o/s & n/s (5.2.3 (e))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Power steering component has slight seepage from a component Rack (2.1.5 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Tyre slightly damaged/cracking or perishing All 4 treads cracking (5.2.3 (d) (ii))

Emissions not tested Due to exhaust leak (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases Tail section (6.1.2 (a))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Exhaust mounting defective Bracket at catalyst broken (6.1.2 (a))

Front Tyre worn close to legal limit/worn on edge o/s & n/s (5.2.3 (e))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Power steering component has slight seepage from a component Rack (2.1.5 (a))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Tyre slightly damaged/cracking or perishing All 4 treads cracking (5.2.3 (d) (ii))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step area (6.1.1 (c) (i))

Rear fog lamp does not emit a steady red light (4.5.4 (a))

beam pattern poor at both headlamps

Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))

Offside Registration plate lamp not working (1.1.C.1d)

n/s/r seatbelt damaged

Headlamp has a product on the lens so that the light output is severely reduced both (1.7.5a)

n/s/r seatbelt damaged

Headlamp has a product on the lens so that the light output is severely reduced both (1.7.5a)

Headlamps matched pair are not the same colour (1.7.6)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)