2000 Mercedes-benz Sprinter

Body component corroded and likely to cause injury both front doors (6.2.1 (a) (i))

Brake pipe excessively corroded front to rear (1.1.11 (c))

Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis both sides in rear wheel arch (6.1.1 (c) (i))

Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door steps both sides (6.1.1 (c) (i))

Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sills both sides (6.1.1 (c) (i))

Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear quarters both sides (6.1.1 (c) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Headlamp aim not tested (4.1.2 (b))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Front Body component corroded and likely to cause injury wheel arch (6.2.1 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch to front panel (6.1.1 (c) (i))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Exhaust emits excessive smoke or vapour likely to obscure the vision of other road users (8.2.2.2 (c)) DANGEROUS

Front Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Nearside Inner sill corroded

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Direction indicator incorrect colour both front (4.4.3 (a))

Nearside Direction indicator not working side repet (4.4.1 (a) (ii))

Offside Front Body component corroded and likely to cause injury wing (6.2.1 (a) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Fuel system component leaking excessively or a risk of fire (6.1.3 (b) (ii)) DANGEROUS

Nearside Inner sill corroded

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Outer sill getting weak due to corrosion

o/s/r inner sill holed

Brake pipe excessively corroded both front to rear (1.1.11 (c))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Front Brake hose porous both sides (1.1.12 (e))

Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member corroded (6.1.1 (c) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step corroded (6.1.1 (c) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by rear shock (5.3.6 (a) (i))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Windscreen wiper missing broken (3.4 (a))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Rear reflector defective or damaged by more than 50% of the reflecting surface both covered by bumper (4.8.1 (a) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Outer sill getting weak due to corrosion

o/s/r inner sill holed

Brake pipe slightly corroded all pipes (3.6.B.2c)

Rear brake disc worn, pitted or scored, but not seriously weakened both sides (3.5.1i)

brake pad warning light on

Front brake disc in such a condition that it is seriously weakened both (3.5.1i)

Horn not working (1.6.2a)

Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering crossmember (6.1.A.1)

Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering spring mount area (6.1.A.1)

Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis under bonnet (6.1.A.1)

Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering spring mount area (6.1.A.1)

Brake pipe slightly corroded all pipes (3.6.B.2c)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

brake pad warning light on

rear underbody corroded both o/s and n/s.

slight play in steering n/s.

Nearside Rear Leaf spring anchor bracket corroded and seriously weakened (2.4.B.6d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Leaf spring anchor bracket corroded and seriously weakened (2.4.B.6d)

Body insecure and dangerous to other road users (6.1.B.1b)

Front registration plate deteriorated (6.3.1d)

Nearside Front Seat belt retracting mechanism defective (5.2.5b)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Front bumper insecure

under body corroded

Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Towbar component excessively corroded (6.6.1)

Front bumper insecure

Brake load sensing valve stiff (3.6.E.3)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Front bumper insecure