2012 Mazda Bongo

Brake pipe corroded, covered in grease or other material ALL (1.1.11 (c))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Brake pipe corroded, covered in grease or other material ALL (1.1.11 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Front Tyre has a tear, caused by separation or partial failure of its structure 215 55 16 (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases flexi (6.1.2 (a))

Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

under body/suspension/gas tank has surface corrosion

Nearside Front Lower Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Mechanical brake component has restricted free movement binding (3.5.1k)

Offside Rear Rear fog lamp not working (1.3.2b)

Front Brake pad(s) wearing thin (3.5.1g)

Front both tyres have wear on outer edges

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

under body/suspension/gas tank has surface corrosion

Items removed from driver's view prior to test ()

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Rear fog lamp not working (1.3.2b)

Items removed from driver's view prior to test ()

Rear Brake pad(s) wearing thin (3.5.1g)

both front tyres outer edges low

advise smell of gas is evident