MOT Status
ValidMileage
223,641 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust emits blue smoke during acceleration (8.2.1.2 (g))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced wing, not prescribed area (6.1.1 (c) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Emissions unable to be completed due to radiator leaking (8.2.1.2 (d))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Seat belt webbing significantly weakened cut from edge greater than 2mm (7.1.2 (b))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (central) (5.3.6 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Exhaust emits blue smoke during acceleration (8.2.1.2 (g))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
oil light flashing
Offside Front Seat belt slightly damaged (7.1.2 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
horn intermittant
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Power steering ram leaking RACK LEAKING (2.1.5 (a))
Offside Battery insecure and likely to cause a short circuit (4.13 (a) (ii))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength WING AREA (5.3.6 (a) (i))
Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Exhaust system insecure (6.1.2 (a))
Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))
HORN INTERMITTANT
Offside Front Seat belt slightly damaged (7.1.2 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Fluid leak, but not excessive power steering (8.4.1 (a) (i))
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Emissions unable to be completed oil light on and noisey engine (8.2.1.2 (d))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Fluid leak, but not excessive power steering (8.4.1 (a) (i))
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Driver's view to the front outside the swept area of the windscreen wipers restricted by an obstruction (3.1 (a) (i))
Nearside Power steering component has slight seepage from a component (2.1.5 (a))
Offside Front Seat belt slightly damaged (7.1.2 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Central Exhaust has a major leak of exhaust gases (6.1.2 (a))
Emissions not tested exhaust blow (8.2.1.2 (d))
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Headlamp lens seriously defective (4.1.1 (b) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Driver's view to the front outside the swept area of the windscreen wipers restricted by an obstruction (3.1 (a) (i))
Nearside Power steering component has slight seepage from a component (2.1.5 (a))
Offside Front Seat belt slightly damaged (7.1.2 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
rear seat turned backwards at time of test
Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Headlamp light intensity severely reduced (4.1.4 (a))
Offside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
rear seat turned backwards at time of test
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Suspension arm ball joint dust cover no longer prevents the ingress of dirt Both front (5.3.4 (b) (ii))
Anti-roll bar pin or bush worn but not resulting in excessive movement Both rear (5.3.4 (a) (i))
Headlamp lens slightly defective Both (4.1.1 (b) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords outer side wall (5.2.3 (d) (i))
Nearside Windscreen wiper blade defective (3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both 'D' bushes perished (5.3.4 (a) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt split (5.3.4 (b) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt split (5.3.4 (b) (ii))
Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords outer side wall (5.2.3 (d) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Windscreen wiper blade defective (3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both 'D' bushes perished (5.3.4 (a) (i))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
oil light flashed while being tested
vehicle not on list, so emissions have been tested accordingly.
Emissions not tested oil pressure light illuminated during the test (8.2.1.2 (d))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Front Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Rear fog lamp emits a light other than red (1.3.2e)
Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
offside and nearside front anti roll bar links worn
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Rear fog lamp emits a light other than red (1.3.2e)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda MPV?
Based on 44,611 MOT tests across 3,157 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
X244 CPA is a 2011 Mazda MPV in Silver with a 1,991cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 53.8%.
Across all 2011 Mazda MPV models, the average MOT pass rate is 68.2% with a typical mileage of 129,796 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MPV fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,975 recorded failures. If you're considering buying X244 CPA, it's worth having these areas checked by a mechanic before committing.
The Mazda MPV typically stays on UK roads for around 31 years. At 15 years old, this Mazda MPV is still in the earlier part of its expected life.
Frequently Asked Questions
How do I check the history of X244 CPA?
You can check the full history of X244 CPA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was X244 CPA registered?
X244 CPA is a 2011 Mazda MPV, first registered on 1 September 2011.
Is X244 CPA safe to buy?
The MOT history for X244 CPA shows 26 tests with a 53.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does X244 CPA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on X244 CPA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.