2000 Volvo S40

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

general underbody corrosion

Nearside Front slightly deteriorated

Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front disc shield corroded

Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

vehicle has light corrosion underneath

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

All four tyres cracked

both track rod end dust covers weak

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material over axle (1.1.11 (c))

boot cant be opened

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material over axle (1.1.11 (c))

boot cant be opened

Anti-roll bar ball joint excessively worn both rear drop links lose (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Emissions not tested (8.2.1.2 (d))

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Front exhaust flexi deteriorated

Rear registration plate faded but not likely to be misread (6.3.1d)

Front Anti-roll bar rubber bush deteriorated resulting in excessive movement both (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both (2.4.G.2)

Offside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Rear wheel bearing rough when rotated (2.6.1)

Front exhaust flexi deteriorated

Rear registration plate faded but not likely to be misread (6.3.1d)

Nearside Rear Lower Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Front registration plate deteriorated (6.3.1d)

Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Registration plate lamp not working both (1.1.C.1d)

Nearside Rear Lower Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Front front brake excessively fluctuating (3.7.B.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

front exhaust corroded

rear tyres low tread on inside

slight play in both front ball joints

exhaust front flexi worn badly

exhaust rattles from cat

rear tyres low tread

Front front brake application uneven (3.7.B.2)

exhaust front flexi worn badly

exhaust rattles from cat

rear tyres low tread

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Rear Brake pad(s) wearing thin (3.5.1g)

n/s/r outer light not working

Nearside Front constant velocity joint gaiter split (2.5.C.1a)