2000 Honda Logo

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Front Headlamp lens seriously defective both (4.1.1 (b) (ii))

Front Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength side sill and closing panel (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength closing panel (5.3.6 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Offside Front wing mirror slightly insecure

Oil leak, but not excessive (8.4.1 (a) (i))

all underbody and components corroded

All under body components and prescribed areas slightly corroded

Front Headlamp lens slightly defective Both sides (4.1.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Headlamp aim unable to be tested due to N/S/F head light to working (4.1.2 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

All under body components and prescribed areas slightly corroded

Front Headlamp lens slightly defective Both sides (4.1.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

All underbody and components corroded.

Front Headlamp lens slightly defective Both (4.1.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Brake pad(s) less than 1.5 mm thick Both (1.1.13 (a) (ii)) DANGEROUS

All underbody and components corroded.

Front Brake disc worn, but not excessively Both (1.1.14 (a) (i))

Front Headlamp lens slightly defective Both (4.1.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced sill/wheel arch (6.1.1 (c) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Registration plate lamp insecure (4.7.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/wheel arch (6.1.1 (c) (i))

Rear Seat belt missing (7.1.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced sill/wheel arch (6.1.1 (c) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Registration plate lamp insecure (4.7.1 (c) (i))

Central Exhaust mounting defective (6.1.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Registration plate lamp insecure (4.7.1 (c) (i))

Central Exhaust mounting defective (6.1.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Registration plate lamp insecure (4.7.1 (c) (i))

Exhaust mounting defective (6.1.2 (a))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Rear Registration plate inscription illegible (0.1 (b))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Exhaust mounting defective (6.1.2 (a))

Registration plate lamp insecure (4.7.1 (c) (i))

Registration plate lamp throwing direct white light to the rear (4.7.1 (a))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Inner Tyre worn close to the legal limit edge (4.1.E.1)

General surface corrosion to exhaust system in places.

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nail in offside rear tyre

Front Brake lining(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)