2000 Toyota Yaris

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge 2mm tread (5.2.3 (e))

Nearside Front Tyre worn close to legal limit/worn on edge 3mm outer (5.2.3 (e))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge 2mm outer (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Headlamp aim projected beam image is obviously incorrect both (clean lenses) (4.1.2 (c))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 3mm outer (5.2.3 (e))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge 2mm outer (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Windscreen wiper not working (3.4 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Front Exhaust has a major leak of exhaust gases pipe (6.1.2 (a))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Nearside Rear Stop lamp(s) emits other than a steady red light (4.3.3 (a) (ii))

Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Front Headlamp lens slightly defective (4.1.1 (b) (i))

both head lamp lens poor

exhaust front pipe leaking

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

both head lamp lens poor

exhaust front pipe leaking

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front tyre tread splitting

Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

oil level very high

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Registration plate lamp not working (1.1.C.1d)

engine man light on

Front Exhaust system not adequately supported (7.1.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

engine man on

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Exhaust system not adequately supported (7.1.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear coil spring incomplete (2.4.C.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Stop lamp not working (1.2.1b)

Front bumper insecure

Rear bumper insecure

Steering system slightly tight (2.2.D.1)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Offside Front Anti-roll bar linkage insecure (2.4.G.1)

Offside Rear wheel bearing rough when rotated (2.6.1)

Offside Stop lamp not working (1.2.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

rear wheel bearings slightly noisy

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)