2000 Daihatsu Terios

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Various components under vehicle have general corrosion

Offside Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Various components under vehicle have general corrosion

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Exhaust mounting defective (6.1.2 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Outer Drive shaft joint worn, but not excessively (6.1.7 (c) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre slightly damaged/valve stem damaged valve cracked (5.2.3 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Subframe mounting prescribed area is excessively corroded chassis rail near subframe mount (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail above trailing arm mount (2.4.A.3)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Outer Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Play in steering rack inner joint(s) ()

Nearside Front coil spring corroded (2.4.C.1b)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Outer Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front coil spring corroded (2.4.C.1b)

front subframe and suspension components has surface corrosion

oil leak

Front registration plate faded but not likely to be misread (6.3.1d)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

surface corrosion across the vehicle

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Bonnet cannot be secured in the closed position (8.4.1)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Oil leak

Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

powersteering pipes corroded

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Oil leak

Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

powersteering pipes corroded

Front tyres slightly perished

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front coil spring corroded (2.4.C.1b)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Front tyres slightly perished

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front coil spring corroded (2.4.C.1b)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

O/S/F tyre perished

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Engine/gearbox mounting(s) defective

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Brake pad(s) wearing thin (3.5.1g)

Front Tyre worn close to the legal limit (4.1.E.1)

Nail in offside rear tyre

Offside Rear Registration plate lamp not working (1.1.5c)