2001 Mitsubishi Canter

reverse lights not working

reverse lights are not working

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

reverse lights are not working

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Leaf spring has slight wear in an anchor pin and/or bush both front spring rear bushes (5.3.4 (a) (i))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Leaf spring has slight wear in an anchor pin and/or bush both front spring rear bushes (5.3.4 (a) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Leaf spring has slight wear in an anchor pin and/or bush both front rear bushes (2.4.B.2)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

both front brakes are slightly grabbing

Leaf spring has a slightly deteriorated anchor pin rubber bush not resulting in excessive movement both front rear bushes (2.4.B.2)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

both front brakes are slightly grabbing

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

rear brake application uneven (3.7.B.2)

Offside Axle beam has slight vertical movement between stub axle and axle beam (2.5.A.1a)

Offside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Nearside Stop lamp not working (1.2.1b)

Offside Inner Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Axle beam has slight vertical movement between stub axle and axle beam (2.5.A.1a)

Offside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

both front brakes are grabbing

Offside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering (2.5.A.3a)

Offside Front position lamp(s) not working (1.1.A.3b)

front brake grabbing slightly (3.7.A.2b)

nearside front wheel bearing is slightly noisey but not yet rough

nearside door mirror glass is cracked

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Inner Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Side repeater incomplete (1.5.A1b)

Exhaust has part of the system excessively deteriorated (7.1.1a)

Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.4.B.1)

Offside Rear rear brake grabbing severely (3.7.A.5b)

Rear rear brake application uneven (3.7.B.2)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

nearside front bump stop missing

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)

Offside Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)