2000 Toyota Yaris

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

all underbody slightly corroded

rear wheel arches rusty but no jagged edges

Body has slight corrosion (6.1.B.2)

Exhaust bracket has snapped but still secure

Front Brake pad(s) wearing thin (3.5.1g)

Front Bumper insecure ()

Fuel filler/breather pipes are corroded

Nearside Rear Tyre worn close to the legal limit also bobbing slightly on inner edge (4.1.E.1)

Vehicle structure has slight corrosion (6.1.B.2)

Brake valve corroded and excessively weakened snapped off from axle (3.6.A.2b)

Front Headlamp excessively deteriorated so that the light output is severely reduced both (1.7.5a)

Nearside Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Body has slight corrosion (6.1.B.2)

Exhaust bracket has snapped but still secure

Front Brake pad(s) wearing thin (3.5.1g)

Front Bumper insecure ()

Fuel filler/breather pipes are corroded

Nearside Rear Tyre worn close to the legal limit also bobbing slightly on inner edge (4.1.E.1)

Vehicle structure has slight corrosion (6.1.B.2)

Central exhaust brackets broken but exhaust is still secure

Front couldn't see brake pads?

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear brake valve compensator bracket has slight corrosion

Nearside Front tyre badly cracking but not exposing cords

Central exhaust brackets broken but exhaust is still secure

Front Headlamp has a product on the lens so that the light output is severely reduced both (1.7.5a)

Front couldn't see brake pads?

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear brake valve compensator bracket has slight corrosion

Nearside Front tyre badly cracking but not exposing cords

EML on

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Exhaust system not adequately supported (7.1.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Tyre tread depth below requirements of 1.6mm 155/80/13 (4.1.E.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Rear Direction indicator incorrect colour both (1.4.A.2f)

front brake application uneven (3.7.B.2)

EML on

Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Fuel pipe/s corroded

engine management light showing with fault

under body slightly corroded

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)