MOT Status
ExpiredMileage
154,370 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
engine management light on
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Play in steering rack inner joint(s) both ()
advise bad noise on gear box
advise front roll bar bushes in track control arms
advise noise on gear box
advise repair on all rear brake pipe
Horn sound not in accordance with requirements (7.7 (c))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii)) DANGEROUS
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Play in steering rack inner joint(s) both ()
advise bad noise on gear box
advise front roll bar bushes in track control arms
advise repair on all rear brake pipe
engine management light on
Items removed from driver's view prior to test ()
Nearside Front Outer Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive SILL (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (5.3.6 (a) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Outer Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive SILL (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (5.3.6 (a) (i))
Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Items removed from driver's view prior to test ()
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
SLIGHT CORROSION REAR AXLE
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Service brake excessively fluctuating (1.2.1 (e))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Items removed from driver's view prior to test ()
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
SLIGHT CORROSION REAR AXLE
Coolant leak ()
E M L LAMP ON
FRONT INNER WHEEL ARCH COVERS FITTED
Items removed from driver's view prior to test ()
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (2.4.A.3)
Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (2.4.A.3)
SLIGHT CORROSION REAR EXHAUST HANGERS
Front Exhaust system not adequately supported (7.1.1)
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Rear Rear wheel bearing rough when rotated (2.6.1)
Nearside Rear rear brake binding (3.7.B.1)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear rear brake binding (3.7.B.1)
Rear Brake load sensing valve seized (3.6.E.3)
Coolant leak ()
E M L LAMP ON
FRONT INNER WHEEL ARCH COVERS FITTED
Items removed from driver's view prior to test ()
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (2.4.A.3)
Nearside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (2.4.A.3)
REAR EXHAUST HANGERS CORRODED
WHEEL ARCH COVERS FITTED
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (2.4.A.3)
Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)
Nearside Rear Shock absorber has an excessively worn linkage (2.7.4)
Nearside Rear Suspension arm corroded and seriously weakened (2.4.G.1)
Offside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)
Offside Headlamp aim too high (1.8)
Offside Rear Suspension arm corroded and seriously weakened (2.4.G.1)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
Play in steering rack inner joint(s)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Vehicle structure has slight corrosion (6.1.A.1)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Vehicle structure has slight corrosion (6.1.A.1)
Centre Front Anti-roll bar corroded and seriously weakened (2.4.G.1)
Centre Rear Registration plate lamp not working (1.1.C.1d)
Nearside Rear Shock absorber casing corroded externally so the unit does not function (2.7.2a)
Offside Front rear brake binding (3.7.B.1)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
n/s/f tyre just starting to get close to wear Indicators.
slight roughness in o/s/r wheel bearing.
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Suzuki Ignis?
Based on 536,876 MOT tests across 40,815 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
X304 RHG is a 2000 Suzuki Ignis in White with a 1,328cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 69.6%.
Across all 2000 Suzuki Ignis models, the average MOT pass rate is 70.8% with a typical mileage of 66,593 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Suzuki Ignis fails its MOT is brake pipe excessively corroded, accounting for 14,088 recorded failures. If you're considering buying X304 RHG, it's worth having these areas checked by a mechanic before committing.
The Suzuki Ignis typically stays on UK roads for around 26 years. At 26 years old, this Suzuki Ignis is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of X304 RHG?
You can check the full history of X304 RHG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was X304 RHG registered?
X304 RHG is a 2000 Suzuki Ignis, first registered on 10 December 2000.
Is X304 RHG safe to buy?
The MOT history for X304 RHG shows 23 tests with a 69.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does X304 RHG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on X304 RHG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.