MOT Status
ExpiredMileage
114,910 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front registration plate deteriorated (6.3.1d)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Windscreen washer provides insufficient washer liquid both (8.2.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brake servo corroded but not excessively weakened (3.6.A.2b)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside front tyre wearing low on outer edge (raised tread pattern)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
front brake application uneven (3.7.B.2)
Brake servo corroded but not excessively weakened (3.6.A.2b)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside front tyre wearing low on outer edge (raised tread pattern)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
front brake application uneven (3.7.B.2)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front registration plate delaminated but not likely to be misread (6.3.1d)
near side rear and off side rear tyres starting to get worn
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Steering rack gaiter split (2.2.D.2d)
Parking brake lever has no reserve travel (3.1.6b)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Service brake: efficiency below requirements (3.7.B.7) DANGEROUS
Front registration plate delaminated but not likely to be misread (6.3.1d)
front brake pads and discs starting to get worn
near side rear and off side rear tyres starting to get worn
Service brake: efficiency below requirements (3.7.B.7)
How Reliable is the Peugeot 106?
Based on 2,880,076 MOT tests across 319,421 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
X309 HKK is a 2000 Peugeot 106 in Green with a 1,124cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 68.8%.
Across all 2000 Peugeot 106 models, the average MOT pass rate is 66.8% with a typical mileage of 66,731 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Peugeot 106 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 155,158 recorded failures. If you're considering buying X309 HKK, it's worth having these areas checked by a mechanic before committing.
The Peugeot 106 typically stays on UK roads for around 34 years. At 26 years old, this Peugeot 106 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of X309 HKK?
You can check the full history of X309 HKK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was X309 HKK registered?
X309 HKK is a 2000 Peugeot 106, first registered on 23 October 2000.
Is X309 HKK safe to buy?
The MOT history for X309 HKK shows 16 tests with a 68.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does X309 HKK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on X309 HKK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.