2000 Toyota Yaris

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front brake ferrules corrodin

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Vehicle structure has slight corrosion (6.1.B.2)

Nearside Front Anti-roll bar linkage damaged and seriously weakened (2.4.G.1)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point. (6.1.B.2)

Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded jacking point. (2.4.A.3)

Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Vehicle structure has slight corrosion (6.1.B.2)

Front Brake pipe excessively corroded (3.6.B.2c)

Front Shock absorber casing corroded externally so the unit does not function (2.7.2a)

Front coil spring corroded so that its cross sectional area is reduced and seriously weakened (2.4.C.1b)

Rear coil spring corroded so that its cross sectional area is reduced and seriously weakened (2.4.C.1b)

Front Vehicle structure has slight corrosion (6.1.A.1)

Fuel pipe/s corroded

Rear Vehicle structure has slight corrosion (6.1.A.1)

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front front brake binding (3.7.B.1)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)